The 18-month “Tier2Tier” project is the work of a consortium led by 4Projects, along with Vinci Construction, M&E subcontractor NG Bailey, the Specialist Engineering Contractors’ Group and the University of Northumbria.
John Adams, BIM project manager at 4Projects, explained that the aim was to address the “considerable difficulties in getting information down the supply chain. Usually the main contractor has the model, and everyone else passes information around via email and FTP sites.”
This is not a paywall. Registration allows us to enhance your experience across Construction Management and ensure we deliver you quality editorial content.
Registering also means you can manage your own CPDs, comments, newsletter sign-ups and privacy settings.
The new cloud-based service, due to be commercially available in autumn 2016, would allow key subcontractors to operate a satellite CDE, which would only host data from the main model relevant to their package, for instance M&E.
The Tier 2 subcontractors would then be able to invite Tier 3/4 suppliers and manufacturers to access the slimmed-down design files, and submit their own estimates, designs and COBie data.
The finalised data would then be uploaded into the main contractor’s BIM model, which would be “the single source of truth”.
Adams said: “It’s a more collaborative approach to building up the data. Everyone has their own satellite, where they can get the information right – checking it against the BIM Execution Plan and file-naming conventions. Everyone would work to the same protocols, but specialist subcontractors would be able to work in their own area.
“NG Bailey, for instance, might not want to work in Vinci’s environment, [because] they will have their own documents, checking procedures and processes. But Vinci would still control all the overall workflows and task management.
“NG Bailey might want to share the drawings with six of its own suppliers and 20 manufacturers. But once all the information [they provide] has passed all the checks, it flows up and down the supply chain.”
The linkage with SEC Group, he said, gave the project access to “a multitude of non-Tier 1 contractors and suppliers”.
BIM+ asked whether the system will only be available to Tier 2 subcontractors working on projects where the main contractor was adopting 4Projects’ BIM environment – known as 4BIM – or whether it could be operated independently and then aligned with a different BIM CDE.
The answer was that the Tier2Tier project would facilitate independent satellite CDEs.
Adams said: “The whole supply chain is unlikely to buy 4Projects, so the point of our bid is to create an inter-CDE language, so we should be able to pass data from CDE to CDE. So we want to create an open-source language, so that the CDE could align with Asite, for instance.
“At the moment, you get BEPs that say ‘everyone will use Revit’ – we don’t want to move from that to a situation where we’re saying ‘everyone should use 4BIM’.”
Adams said that the vast majority of projects are still using FTP sites such as Dropbox and email to transfer information along the supply chain. “There’s a large part of the industry out there looking for solutions that suit them.”
Everyone has their own satellite, where they can get the information right – checking it against the BIM Execution Plan and file-naming conventions. Everyone would work to the same protocols, but specialist subcontractors would be able to work in their own area.
– John Adams, BIM project manager, 4Projects
